Combi 105 HE fault | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Combi 105 HE fault in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

bigcheese

Gas Engineer
Messages
35
I went to a breakdown on a Combi 105 HE last week. The 50 degree/fan light was flashing. I followed the manufacturers fault finding and spoke to them. After all checks completed the fault was diagnosed as a dirty venturi. I cleaned this out and everything fired up fine. The customer has just rung and said it is happening again. Any ideas anyone?
 
If you are Gas Safe then get your self in to The Plumbers arms, No advice can been given on a open forum due to entry into the Combustion Chamber.
 
I went to a breakdown on a Combi 105 HE last week. The 50 degree/fan light was flashing. I followed the manufacturers fault finding and spoke to them. After all checks completed the fault was diagnosed as a dirty venturi. I cleaned this out and everything fired up fine. The customer has just rung and said it is happening again. Any ideas anyone?
Forum rules do not allow the discusion of boiler faults and their repair outside of the private gas safe registered engineers forum. Pm an admin your gsr details and if you have enough posts they will let you in.
 
Status
Not open for further replies.

Similar plumbing topics

You need a new service engineer not a new...
Replies
3
Views
927
They are the same, I just checked.
Replies
15
Views
193
The 830 and 630 are the same boiler, just the...
Replies
7
Views
222
    • Like
Thanks Shaun. I've never done one :-( Always a...
Replies
2
Views
3K
  • Locked
you very rarely need the condy trap you just...
Replies
17
Views
223
Back
Top