We have a Potterton Combi boiler, it was losing pressure. Engineer replaced the diverter valve and said it was corroded. It worked fine for a few days before making a loud banging noise for s few minutes which stopped when the sink taps were on. It was ok for a couple of days and then went off completely. The engineer says the circuit board needs replacing but I'm wondering what caused the issue with the circuit board & whether it will just blow again. I think the boiler is about 8 years old. Any advice welcome.
-
Welcome to PlumbersTalk.net
Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum
Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws
American Visitor?
Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.
- Thread starter PotterG
- Start date
- Replies 1
- Views 966
-
- Tags
- boiler combi combi boiler
Discuss Combi boiler kettling in the Boilers area at Plumbers Forums
- Messages
- 34,632
- Solutions
- 1
I would get a second opinion
Similar plumbing topics
You need a new service engineer not a new...
Its easy to check for a leak, just tie up the...
Thanks for the reply, I’ll try your...
There is 6 pipes under the boiler and one goes...
- Happyharry
- Boilers
- 19
- 970
- Latest:
- Happyharry
Unfortunately the fitting of a new Venturi did...