B
beany_bot
So the pressure on our Ferroli combi boiler is weird. I've done some reading and found that (I think) cold pressure should be around 1.5bar and hot temp should be around 2bar? Thing is, mine has a massive range. Mine has to sit about 0.5bar cold because that takes it up to 3 bar when its hot, if I was to leave it at 1.5bar cold then it would shoot way up towards 4bar when hot. Why does mine have this massive difference between hot and cold pressures? I'ts annoying keeping it down at 0.5bar because if it drops even slightly below that it wont come on and i have to let a little more water into the system to get it back to 0.5bar.
Any help welcome. Thanks.
Any help welcome. Thanks.