Combi Diverter valves...

[mutley racers]

I have a riva plus he that is passing down the heating circuit, do you guys use a repair kit or change the whole valve?

Also, can you buy 1 metre lengths of work top any where by any chance?? Probably not but worth asking. Cheers chaps

 

[arran197]

We fit the kit.

 

[mutley racers]

We fit the kit.

I just bought the kit but when calling up biasi to get the product number he asked if I had already replaced the board. So I am assuming it is a common fault for the board to not extract the actuator pin. Will be a bummer if it is as I had not been to the boiler but bought the kit just incase it was a quick fix.

Anyone know if the board is a common fault on this biasi?

 

[arran197]

I don't tbh, but it's a biasi, so anything is possible.

 

[Billy Bob Bob]

i use the kits for the dv,s try howdens for the worktops

 

[mutley racers]

So the kit didn't fix it. Will go back next week with a new motor.

 

[lame plumber]

So the kit didn't fix it. Will go back next week with a new motor.

ffs rugby is on................ no plumbing discussions

 

[Roger Welton]

Worth checking the plate isnt blocked .

 

[mutley racers]

Worth checking the plate isnt blocked .

Wouldn't be going hot and cold? Can you check and clean the bypass on these?

 

[mutley racers]

ffs rugby is on................ no plumbing discussions

Now that is LARY

 

[Eric withy]

should have helped with the question we might have beaten wales