combi hot water problem | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss combi hot water problem in the Bathroom Advice area at Plumbers Forums

H

hazy p

Hi all this is my first thread the hot water on worcester junior 28i combi boiler is only firing up for a few seconds intermittently so therefore no hot water, any advice on how to sort the problem would be greatly appreciated, thanks
 
as a guess mickey mouse install poss a vented before that wasnt flushed and now plate heat exchanger or worse manin heat exchanger sludged..thats a internet diagnosis tough so engineer on site needed
 
The heating circuit was not getting used at all with the hot weather so I fired it up full for a few minutes and that seems to have flushed both circuits out now the hot water is working again.
 
Everything seems to be working fine now, thanks for all your help and if there is any problems ill let you know , just out of curiosity if the dhw exchanger was slugged wouldn't it show signs at the taps?
 
no the water going through the exchanger is from the main
the water heating it has to flow through a very thin fin and as such prone to blocking if not properly flushed and inhibitor added
 

Similar plumbing topics

C
  • Question
Thanks for replying matey. You've been a...
Replies
3
Views
1K
There is 6 pipes under the boiler and one goes...
Replies
19
Views
1K
  • Question
I used wd40’s silicone spray version
Replies
6
Views
917
  • Question
Thanks. I'll try to find a hard copy as I...
Replies
3
Views
954
L
That shouldn't happen. Going to need lots of...
Replies
1
Views
315
Back
Top