Combi pump head replacement

[mcniven]

Dont know if I am going to embarass myself here, replaced a faulty grundfoss pump head in a Vokera combi with another grundfoss head, any diff was wiring was on other side so new pump I had to fit (so the writing etc) was upside down......

However there was still a problem, can u just confirm that even if the head no matter what way the wiring is facing its always going to be pumping the same direction lolol

 

[Ermintrude]

As long as the wirings not pointing at the floor!

 

[Dotty]

Darren, Darren, Darren........

What way does the impellor spin? And if you rotate the head 180deg on its axis what way does the impellor spin then?

Go and have a brew mate, you're over thinking this.

 

[SimonG]

Somebody's had a hard christmas. Been there, done that in a stressed out moment before.

 

[SimonG]

Moments like that normally end in calling myself a few names.

 

[Leo21]

Grundfos have arrows showing orientation on. Check it against the one you took out.

 

[PlumbBobBob]

isn't the arrow on the main body though?

 

[mcniven]

No theres no arrow, but in the. MI pumps in the return but theres no arrow on my new grundfoss pump head just the wirings on other side

 

[mcniven]

The head will always be spinning in the same direction tho would it not, no matter what way it's fitted..

I'm getting to deep here Christmas has been hard lol

 

[glenno1]

turn it 180,360 or 720 it will spin same way the stress is confusing you mate

 

[mcniven]

Haha my worst post to date

 

[Leo21]

Haha my worst post to date

Nah, you've done worse.