Commercial Low Loss Headers

[spanneroonie]

Looking to fit a Worcester GB162 300kW cascade (3x 100kW) and was wondering whether any of you recommend using the Worcester Low Loss Header or something else?

Personally think that it would be good to fit something with an automatic air vent and dirt discharge, but is that something you all look for as well / common practice?

 

[ShaunCorbs]

Do you have commercial experience is the first question

 

[spanneroonie]

Yes, I fit around 1-2 commercial systems a month and recently a friend of mine suggested looking at other options than fitting the stock header. Just wanted to hear some other opinions on whether its worth going for something different.

 

[ShaunCorbs]

I would have a look at the caleffi

http://www.caleffi.com/sites/default/files/coll_attach_file/idronics_1_0.pdf

 

[Dotty]

I'd go with the WB one.

 

[missplumb]

I'd agree with Croppie, stuck to the manufacturers if your using Worcester boilers etc, but it could be cheaper to have one made to order!V A Heating Ltd home page

 

[Worcester]

Or you could check out these guys as well: Hydronic Headers - Fabricated Products