concealed cistern | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss concealed cistern in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

wanttolearn

Gas Engineer
Messages
100
Hi guys been to a job and the customer wants to get rid of a push button flush on a conceald toilet and wants a lever handle put on. Where is the best place to pick one up from and has anybody else done this before.
 
Nothing wrong with push button if they are set up correctly, I bet he has a really nasty one that he's sick of and want the older type back.

Best bet Fluidmast flapper valve or a cable operated flush valve.
 
Yes correct it's really hard to push in as with them being old too they are struggling with it.
I did mention to just replace the push button
 
Wirquin do a small lever version (screwfix). I tend to fit 'em for people with arthritis. You lift for short and press down for long (or the other way round!!) Alternatively there are the electronic versions now - again by Wirquin - that are both low cost and reliable. HTH
 
if you go down the lever route they will most likely need a new panel as the hole will be too big. unless you can get something to cover the hole with
 
Status
Not open for further replies.

Similar plumbing topics

J
It looks like the first nut to the handle...
Replies
2
Views
598
  • Question
Thanks for the reply. I didn’t get a photo...
Replies
2
Views
303
Bit late to the show but I would have beeen...
Replies
2
Views
764
B
Sometimes you have to think outside the box...
Replies
7
Views
2K
Can it easily be replaced with a non-pneumatic...
Replies
2
Views
3K
Back
Top