Condensate pipe dripping | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Condensate pipe dripping in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
G

gates1979

My Baxi platinum 24he keeps losing pressure and I have no leaks anywhere the prv isn't dripping and the expansion vessel seems to be holding pressure. The only thing I have noticed is the condensate pipe is dripping when the boiler isn't running could this be where the water is going and if so hows it getting to the condensate pipe
 
sorry mate but no one will answer this as it is a safety issue. You either need to be gas safe registered and apply to be let into the sticky after posting 10 posts and giving your details to the mods, or find a GSR engineer. Post in the wanting an engineer section.
 
You shouldn't let people impersonate you crop, personally I think it's bang out of order.
 
I think the first answer was the right one!! Why give a layman all the answers when we gsr engineers have to spend all our time money & effort to let others who want to do a cheap repair themselves get it for free.
 
I think the first answer was the right one!! Why give a layman all the answers when we gsr engineers have to spend all our time money & effort to let others who want to do a cheap repair themselves get it for free.

Completely agree.

You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html
 
Status
Not open for further replies.

Similar plumbing topics

Baxi Neta-tec
Replies
5
Views
857
  • Question
No
Replies
9
Views
722
Could be the expansion relief or an overflow...
Replies
1
Views
442
IMO, the boiler should be derated to ~ 20kw...
Replies
18
Views
1K
Expansion vessel undersized, blocked flexi to...
Replies
1
Views
806
Back
Top