Condense pump pipe run | Gas Engineers Forum | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Condense pump pipe run in the Gas Engineers Forum area at Plumbers Forums

Jennie

Gas Engineer
Messages
283
Hi all,
I'm due to fit a condense pump on a boiler install. I'd love an easy install.
The little plastic pipe from the condense pump obviously goes up first. But after that? Can I get away with a short (3m) horizontal run before I run it into the soil stack? Or would I be pushing my luck?
Advice much appreciated.
Jennie
 

Similar plumbing topics

Just to round this off with what I found here...
Replies
5
Views
604
  • Question
If rainwater pipe discharges to a combined...
Replies
2
Views
763
Heating water using electric is about 3 x the...
Replies
2
Views
1K
10 o’clock / 45 degrees would be better than...
Replies
3
Views
577
Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
795
Back
Top