Confusing pipe centres

[mhudson115]

Hi all, To save a re-tile I am trying to locate a chrome shower mixer which has 184mm inlet pipe centres. The original mixer was replaced with a cheapie mixer and a brass connector to fill the gap (cheapie shower has 150mm centres). As you can imagine it looks a bit of a mess with the brass connector and off-centre mixer. I have emailed a few manufactures and they claim not to make a shower with these dimensions. The customer reckons the original was an Aqualisa so they were my first port of call but they never made one. Any suggestions would be greatly appreciated. Thanks in advance. Mark

 

[easyt]

Is it deck mounted or wall. I think 180 centres are normally for bath or deck mounts.

 

[mhudson115]

Is it deck mounted or wall. I think 180 centres are normally for bath or deck mounts.

Hi Easyt. It is wall mounted (surface).

Thanks Mark

 

[easyt]

Mira use offset connecters to give 150 plus or minus 24mm so 174mm is poss

 

[WHPES]

I think you will be struggling - never seen anything other than 150mm recently. Perhaps you may be able to cobble something together using bath mixer legs.