connect copper to iron gas | Gas Engineers Forum | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

connect copper to iron gas

Post thread

Discuss connect copper to iron gas in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
D

desrob

Messages
1,582
i think the iron is 20mm not sure what sizes does iron come in,i need to connect 22mm copper what do you use....?
 
It will be half inch or 3/4 thread, use a copper to iron.
 
Mechanical joints should not be buried or hidden, it's in the Irish regs which are very close to the UK regs.
 
Status
Not open for further replies.

Similar plumbing topics

M
radiator connections
As above, flush and test before even thinking...
Replies
2
Views
576
SimonG
SimonG
S
Upgrade gas supply line from galvenised steel to copper?
It's not a requirement to replace the whole...
Replies
2
Views
875
oz-plumber
O
A
  • Question
Connecting To Old 3/4" Copper Pipe That's Smaller Than Usual
It’s massive in size so if under a floor it’s...
Replies
6
Views
820
ShaunCorbs
ShaunCorbs
P
Working gas pressure on Vaillant ecotec 630
Thank you for the replies. I had another...
Replies
4
Views
836
PeterCylus
P
Antony_0
  • Question
20mm MDPE to 25MDPE (and 22mm Copper)
Nice! I didn't know that existed. Appreciate...
Replies
8
Views
3K
Antony_0
Antony_0
Back
Top