connecting a test pump to 15mm pipe (air)

[Scott_D]

Has anyone got a simple way to connect an air pump to 15mm pipe to rig up a crude air test kit?
Jut want to check I dont have open ends before filling up on my own

 

[king of pipes]

I use my regin stand pump and rothenberger test gauge . Kop

 

[ShaunCorbs]

Mine cost me around a tenner as I had the gauge

 

[Scott_D]

Mine cost me around a tenner as I had the gauge

Where did you get the shrader valve?
Is it 1/4”?

 

[ShaunCorbs]

Where did you get the shrader valve?
Is it 1/4”?

All items was from bes think around £3 for the shrader valve (most expensive part)

 

[Scott_D]

All items was from bes think around £3 for the shrader valve (most expensive part)

I will take a look
Thanks

 

[ShaunCorbs]

I will take a look
Thanks

If you want I can put up a link list to my set up ?

 

[Scott_D]

If you want I can put up a link list to my set up ?

Yes please mate, that would be handy

 

[ShaunCorbs]

Brass Threaded Hexagon Bush 1/4" BSP PM x 1/8" BSP PF
P/N 6617

Brass Threaded Hexagon Bush 1/2" BSP TM x 3/8" BSP PF
P/N: 0784

Brass Threaded Hexagon Bush 1/2" BSP PM x 1/4" BSP PF
P/N: 6621

High Pressure Test Point Nipple - 1/8" BSP TM
P/N: 21329

Brass Hexagon Reducing Nipple - 3/4" x 1/2" BSP T
P/N: 10596

Gas Ball Valve - 1/4" x 1/4" BSP TM x PF Lever Handle
P/N: 9632

Brass Threaded Equal Tee - 1/2" BSP PF
P/N: 6544

Brass Threaded Hexagon Nipple Brass - 1/2" BSP T
P/N: 6582

JG Speedfit Female Coupler - 22mm x 3/4" BSP F
P/N: 7092

JG Speedfit Push-fit Reducer - 22mm x 15mm
P/N: 7103

Then you just need a gauge with a 3/8 connection

Sorry for the late reply

 

[king of pipes]

Nice little set up Shaunie . Kop

 

[Scott_D]

Thanks Shaun
I will place an order this week
I would click like but I’m still on the naught step.

 

[ShaunCorbs]

Thanks Shaun
I will place an order this week
I would click like but I’m still on the naught step.

No worries pick some loctite 577 up makes making it up easy