Conventional flue combi boilers?

[choco]

Can you get them? A customer wants to replace an old floor-standing Ideal Mexico boiler that's in a hallway cupboard and change over to a combi system. It's a flat with concrete floors, so moving the boiler location to an outside wall is going to be an expensive job.

 

[GrahamM]

Can you elaborate a bit?
How is the boiler flued at moment?

 

[Millsy 82]

No everything is room sealed now. Atag do boilers with loads of different flueing options so have a look at them as they might do something that can go in.

 

[choco]

I took a couple of pics, but it was ages ago when I first looked at this job. It's a third floor apartment (albeit top floor). I didn't look at where the flue terminated as I was only quoting to change their two bathrooms at the time.

I haven't posted photos on here before so this might be a FAIL...

 

[stevetheplumber]

any boiler will fit using a vertical flue kit assuming this is top floor

 

[snowhead]

Run the new flue where the old flue runs, but you need to be aware of what the old flue is made of.

 

[tamz]

As bes tos:willy_nilly:

 

[jtsplumbing]

1st are you GSR ? if you are then you must have coverd flues in your gas course.

 

[E4gas]

Move the boiler position , there must be another option ,, flue looks asbestos ..

 

[E4gas]

How far is the outside wall , as this boiler needs a air supply ,,