Cooker jets cleaning. Gas Safe qualified to do this? | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Cooker jets cleaning. Gas Safe qualified to do this? in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.
S

stueymillar

I'm the maintenance supervisor for a housing provider.

I've been asked to clean the jets on a gas cooker because there are only 3 rings working.

My lads are maintenance guys and are not Gas Safe.

Do you have to be Gas Safe to do this work?
 
How can your lads prove the appliance is safe to use after they have a tamper with it?

youd have to remove or replace the jets to do this.

i would class that as "work"

how do you know the gas tap hasn't failed?

my view is you need an engineer.
 
if its gas and it is part of a cooker, boiler fire you have to be gsr or your flouting the law! would you know how to check burner output, gas rate the cooker on completion?
 
dont you hate it when you drop the nozzle and it rolls out of sight, down a hole etc etc
 
To clean those gas jets properly they need to be removed. This constitutes gas work and therefore appliance checks under GSIUR 26(9) AND GSIUR(3) apply.
 
You were right to check, and on the basis of the good advice you've had matey

We cannot and will not give advice on the installation or repair of boilers, cookers or ANY gas appliances for your own safety.

Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. [DLMURL="http://www.ukplumbersforums.co.uk/im-looking-plumber-gas-engineer/"]I'm looking for a Plumber or Gas Engineer[/DLMURL]

If you are gsr please increase your post count to 10+ then send a PM (Private Message) with your gsr details to either Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK who will check you and then give you access to the gsr private forum.

Providing gas-related advice to anybody who should not be touching gas and cannot prove their competence is unacceptable. We will take whatever action we deem appropriate to prevent such advice being given


Thank you.

UKPF TA's, Mods and Admin teams.

http://www.ukplumbersforums.co.uk/central-heating-forum/42241-notice-gas-safety-related-advice.html
 
Status
Not open for further replies.

Similar plumbing topics

What about a metal blanking plate?
Replies
5
Views
858
When they converted to northsea gas in the...
Replies
3
Views
603
Ahhh that one it’s a nope from me failed...
Replies
4
Views
735
Thanks for the replies. So the distance is...
Replies
5
Views
2K
Ok I think I see what your saying mate, So...
Replies
9
Views
1K
Back
Top