Hi all, happy new year
Current set up - 210 litre vented direct copper cyclinder with 2 immersion heater. For last 2.5 years have only used the top immersion as bottom one was connected to old fuse board which wasnt working (now removed).
What are your thoughts whether a copper or stainless steel is best to be used?
I will want to install a smaller one around 100 L to make use of airing cupboard space as my flat has poor storage. Also shower is electric so only hot water for kitchen, basin and bath which is rarely used.
I am currently doing my plumbing qualifications so will do the work myself as is good practice.
Thanks for any help
Current set up - 210 litre vented direct copper cyclinder with 2 immersion heater. For last 2.5 years have only used the top immersion as bottom one was connected to old fuse board which wasnt working (now removed).
What are your thoughts whether a copper or stainless steel is best to be used?
I will want to install a smaller one around 100 L to make use of airing cupboard space as my flat has poor storage. Also shower is electric so only hot water for kitchen, basin and bath which is rarely used.
I am currently doing my plumbing qualifications so will do the work myself as is good practice.
Thanks for any help