Copper waste to Plastic

[FrankieF]

Heys guys,
Need some help. I have to fit a 32mm waste pipe to an "old" 1 1/2 inch copper waste, all internal piping, so cannot remove the copper pipe, so stuck with it unfortunately.😡
I know there are some fittings out there available, but do you know where I can get them.....?😕
If not, can only think of quick fixes, but not a choice i would like to choose......😱
Any help would be greatly appreciated.

regards

Frankief

 

[payney1974]

You need a mechanical coupler from any plumbers merchants or b&q.

 

[johnmcginty]

1 1/4 " flexible compression will do it available from any plumbers merchants.

 

[Blackcatgas]

Ive got a feeling that a normal 11/2 push fit fitting will go straight onto the copper, failing that as said mechanical coupler.

 

[REDSAW]

did 3 of those before xmas, you need 1''1/2 compresion to short flexi. that will sort it 100per.

 

[kirkgas]

if you are going from 11/2" copper to 32mm, best to use a 38mm McAlpine multifit straight coupling with 38x32 reducer in it, (dont use crappy multifit from Q&B etc they are mince)

 

[Billy Bob Bob]

if you are going from 11/2" copper to 32mm, best to use a 38mm McAlpine multifit straight coupling with 38x32 reducer in it, (dont use crappy multifit from Q&B etc they are mince)

agree mcalpine for me to

 

[donald1]

did 3 of those before xmas, you need 1''1/2 compresion to short flexi. that will sort it 100per.

this is perfect post.i will suggest this too.