Corner valves for a radiator

[Custard]

Hi, I have bought corner valves to use on a new towel radiator. As you can see in the attached pic, one part of the valve has a small circular hole in it, and the other part has a large semicircular hole. Which end - 1 or 2 - should I connect to the water pipe and which end should I connect to the radiator?
Many thanks for any help!

 

[king of pipes]

I'd say they go like this custard 👍. Kop

 

[Custard]

Thanks for the reply, but should I attach the radiator tail to the end of the valve that looks like this...

or the one that looks like this...

 

[king of pipes]

Put em on the table face the valve handles to each other as the picture , the radiator tails go in the connections which are vertically up they can only go one way . Kop

 

[Ben-gee]

If they are both nut/olive connections it doesn’t matter, either way will do.

 

[Custard]

That's great. Thank you for your help!

 

[ShaunCorbs]

Looks like you’ve bought the wrong valves you can’t thread them into the towel rail you need a union connector like in kops picture