Could this have been done better?

[OhGoOn]

Could this piping have been done any better? It looks so unsightly.

 

[townfanjon]

Hell yes , looks shocking

 

[Riley]

Not the best. Were they gas safe ?? Nothing wrong with the compression elbow but doesn’t show much in the way of pipe skills

 

[gmartine]

Was the installer GSR?

 

[Riley]

Is that loads of ptfe on show. Sorry not the best pic

 

[gmartine]

...thought it was a nail on pipe clip, not sure what's worse.

 

[Harvest Fields]

Looks ok from my house.

 

[townfanjon]

To “coin a phrase” my old neighbour would say ,
“It looks ok to a blind man on a galloping horse “

 

[DGT plumbing]

If your asking you already know the answer and if your still unsure, yes it could have been done better.

 

[Welder]

If the question is about the hoovering then def

 

[quality]

looks shocking

 

[Millsy 82]

All depends on how much you were willing to spend. It could of been done nicer but that would cost more and customers usually try to get the cheapest quote.

 

[Moof]

Not adequately supported, be very careful with the hoover

 

[AMGasServices]

Shocking.

 

[OhGoOn]

Hi, thanks for your comments. Some of you can't see photo clear enough so here is a closer look, please ignore the TV cable. I would like some constructive advice from a professional if possible so I know how to ask a gas engineer or builder to put it right. It was a Gas Safe engineer who installed the fire and I also check him on the register. I didn't quibble about the price or asked for it to be done as cheap as possible.

 

[Harvest Fields]

You will not get the advice you are looking for I am afraid. Apart from get a gas safe engineer in to do the work for you.

 

[Welder]

Personally, I'd expect something on show like that to have executed with more consideration for asthetics.
Did you tell him(?) it was okay at the time? If you did, then I feel you have a little responsibility too.

 

[ShaunCorbs]

It’s one of them depends where the inlet to the fire is

 

[Last Plumber]

Why has he put a valve in a restrictor elbow?
Not that this is the only concern! just makes me wonder who does things like that and why.

 

[Harvest Fields]

Lots to be rectified. Gas engineer? Optimistic personally!

 

[Deleted member 32524]

Looks diy to me. You sure you have not done it!!?? Everything about it is horrible. Copper looks like bits I have in my copper scrap bin whole thing appears to me like it has been done by a handyman.

 

[quality]

Why has he put a valve in a restrictor elbow?
Not that this is the only concern! just makes me wonder who does things like that and why.

Thats all he had in the van

 

[Best]

Ptfe tape over the olives and clearly been put on some of compression fittings threads.
It hasn’t been installed by someone who knows about making joints.

 

[Scott_D]

How much did this job cost?

 

[OhGoOn]

How much did this job cost?

To install gas fire £120