CP12 Certs and Price Work. | Gaining Plumbing Experience | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss CP12 Certs and Price Work. in the Gaining Plumbing Experience area at Plumbers Forums

richard978

Gas Engineer
Messages
171
I'm looking at taking a job doing landlord certs, I've never done a high volume service contract and always charged about £40.00 and I tend to spend an hour doing it.

Now the company is offering £14.30 per CP12 and I'm just wondering how many I can do to see if its worth my while taking it on. Apparently all the work is in close proximity but I'm still not convinced I will get more than 8 done.

They provide the van and fuel and most houses it will be a boiler and a cooker. I suppose the problem starts when I get an FBU or a gas fire as I tend to find these do take some time.
 
£14.30? I wouldn't even consider it for that amount. That's actually laughable.

I thought it was low, but I've always worked for myself and charged around £40, I think the lowest I've done was £30.00 and that was a single logic I installed the year before.

I might re-cinder the offer as I can see me working 14 hour days to make £120.00 quid.
 
Around here max is around £45.00....that's one appliance. If there is a gas fire then it goes up to around £70.00

I'm just skint at the moment and need the money. I took a smart contract on and the money was amazing but it played havoc with my wrists and in the end got so bored of it quit. Problem is I've neglected my own business and now I'm finding it pretty tough.
 
Derby Nottingham Leicester, I've depleted my emergency funds and scratching around for work now. I was doing some smart meters which was good money but boring and was killing my wrists.
 
If your needing it and it's either that or packing in do it but you won't be making anything

But you need to be doing two an hour
 
Tell that to the hoards of plumbers around here swapping boilers for £1100 quid all in. I won't do it for less than £1600.00 as there is far too much work in that type of job to be only making £200 quid.
 
I've got an offer of some responsive plumbing work which is £17.00 per hour which is better but still not great

If you don't mind me asking what's wrong with your wrists
 
I would say you have three options

Go back to meter fitting
Jack it in and do something else
Go labouring / subbing

It's getting bleak these days and someone will always be cheaper / willing to work for nothing
 
I've got some sub plumbing work, at £17 per hour and 44 pence a mile with some gas work, plus I have my own work which is steady but I need to build that back up. I just need to be able to keep the lease up on the van and ride out this rough patch....
 
I've got some sub plumbing work, at £17 per hour and 44 pence a mile with some gas work, plus I have my own work which is steady but I need to build that back up. I just need to be able to keep the lease up on the van and ride out this rough patch..

Would want more for any gas work as it's not the same as plumbing
 
There seems to be an awful lot of people doing work from cars around here at the moment, never a good sign. I was at tenants house last week and some guy was there to fit a cooker from a second hand shop. He literally just plugged it in and buggered off. No manual left, no tightness test, no working pressure etc etc.....I just unplugged it, removed the bayonet fitting and capped the backplate and issued a warning notice.

so much for gas safety
 
There seems to be an awful lot of people doing work from cars around here at the moment, never a good sign. I was at tenants house last week and some guy was there to fit a cooker from a second hand shop. He literally just plugged it in and buggered off. No manual left, no tightness test, no working pressure etc etc...I just unplugged it, removed the bayonet fitting and capped the backplate and issued a warning notice.

so much for gas safety

Why did you disconnect? Apart from not doing the job to the book, was anything actually wrong with it?
 
I'm looking at taking a job doing landlord certs, I've never done a high volume service contract and always charged about £40.00 and I tend to spend an hour doing it.

Now the company is offering £14.30 per CP12 and I'm just wondering how many I can do to see if its worth my while taking it on. Apparently all the work is in close proximity but I'm still not convinced I will get more than 8 done.

They provide the van and fuel and most houses it will be a boiler and a cooker. I suppose the problem starts when I get an FBU or a gas fire as I tend to find these do take some time.
Where abouts are you? If you're anywhere near S.London I can give you 20 GSR's to do ASAP at £45 a pop. Let me know.
 

Similar plumbing topics

Presumably, you are qestioning MY training? At...
2
Replies
40
Views
6K
M
My feeling is that it's not the homeowners...
Replies
5
Views
1K
Working at a flow temp of 30 ? As a dt of 30...
Replies
6
Views
4K
G
Hi guys I am recently trained and Gas Safe...
Replies
0
Views
1K
Gas safety guy
G
P
Thanks. I did try some other engineers and one...
Replies
4
Views
4K
P
Back
Top