Damixa Merkur 14001 - lekkasje

[bmhildrum]

Hei

Jeg har en Damixa Merkur 14001 kjøkkenkran.
Denne lekker.
Tror det er ventil som lekker.
Har kjøpt ny. (Delenr:2362300)

Men det er en del jeg ikke får av:

Se vedlegg:

Jeg har typen som er til venstre i pdf. Den til høyre finner jeg mange videoer og beskrivelser for...
Får av håndtak, men den delen under får jeg ikke av...
Skal den skrues/presses opp??? Sitter veldig godt.
Eller må det til noe spesialverktøy?

 

[bmhildrum]

English:

Hello

I have a Damixa Merkur 14001 kitchen tap.
It is leaking.
Think it's a valve that is leaking.
Bought new. (Part No: 2362300)

But there is a part thatI can't get off.

See Attachment in the first post:

I have the type that is on the left in pdf. On the right I find many videos and descriptions for ...
Get the handle off, but the part below I do not get off ...
Should it be screwed up / pressed up ???
Or do I need some special tools?

 

[ShaunCorbs]

Unscrew the very top dome

 

[Mosern]

I have the exact same issue. Did you manage to get it off somehow?

 

[bmhildrum]

I have the exact same issue. Did you manage to get it off somehow?

Yes. This worked for me. Got this tips from damixa.
I used armed tape and a hammer.

 

[Mosern]

View attachment 73649

Yes. This worked for me. Got this tips from damixa.
I used armed tape and a hammer.

Interesting. Will give that a try. Did you hammer a lot, or just small taps?
Did the cover needed to be unscrewed afterwards, or it is just sliding upwards ?
(What is the point of the hammering? Is it just stuck?)

 

[Mosern]

Interesting. Will give that a try. Did you hammer a lot, or just small taps?
Did the cover needed to be unscrewed afterwards, or it is just sliding upwards ?
(What is the point of the hammering? Is it just stuck?)

No luck, it've hit the purple parts of it with a hammer - still pretty much stuck as before.

 

[bmhildrum]

Interesting. Will give that a try. Did you hammer a lot, or just small taps?
Did the cover needed to be unscrewed afterwards, or it is just sliding upwards ?
(What is the point of the hammering? Is it just stuck?)

Hammered where the red marks is, all around.
I did not hammer very gently and got som scratches, but it works and you don't see it if you don't know about it.
You have to unscrew it afterwords, I used a oil filter(for cars) tool to get some force. But when i had hammered enaugh it was easy to unscrew.
I also attached a picture after this was unscrewed.
This was also my problem, I did not know how this was inside(sliding up or unscrew).

 

[Mosern]

View attachment 73695
View attachment 73696
Hammered where the red marks is, all around.
I did not hammer very gently and got som scratches, but it works and you don't see it if you don't know about it.
You have to unscrew it afterwords, I used a oil filter(for cars) tool to get some force. But when i had hammered enaugh it was easy to unscrew.
I also attached a picture after this was unscrewed.
This was also my problem, I did not know how this was inside(sliding up or unscrew).

Thanks a lot, I'll hit it a bit more tomorrow (maybe harder) and will find some tool to try unscrew it as well. Hopefully that will work.