danfoss pump on sterling 40 | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

danfoss pump on sterling 40

Post thread

Discuss danfoss pump on sterling 40 in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
A

apcdave

Messages
187
Hi all,

sterling 40 ST108 will not fire. The punter ran out of oil but has had 200 litres delivered yesterday. There is a tiger loop in place. No oil coming thro at suction port but loads from return line. Any suggestions? Attached a vacuum guage and got no reading.

thanks

dave
 
Status
Not open for further replies.

Similar plumbing topics

O
HRM Starflow 50/85 won't fire up, serial no 1099/50/299
Wait until you can get hold of somebody with...
Replies
4
Views
924
SimonG
SimonG
P
  • Locked
Worcester Danesmoor Wallhung
Finally got back to this one. Fitted the...
Replies
17
Views
2K
PhoenixServices
P
G
  • Locked
Riello oil pump - water in system - advice
Your experience with your previous boiler...
Replies
6
Views
9K
Best
Best
C
  • Locked
Loss of pump circulation to boiler after radiator modification Read more: http://ww
Re: Loss of pump circulation to boiler after...
Replies
7
Views
1K
craigskelly
C
C
  • Locked
Oil Boiler Issues
You sure its locking out and not going off on...
Replies
18
Views
5K
Bunker
B
Back
Top