Danfoss setting...wall thermostat position. | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Danfoss setting...wall thermostat position. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Messages
12
Hello,

When a Danfoss RAS C2 10 mm TRV is open to its maximum setting is this the same or almost the same as having a rad with no TRV ?.
And if it is open to this maximum and left open can a wall thermostat be placed in the same room and work effectively ?.
I'm in a property with a newly fitted gas boiler/rad system...22 rads actually and am looking for the best place to position the thermostat....a Worcester Bosch Comfort 2.
Am thinking maybe a Hive system was perhaps the way I should have gone.
Thanks.
 
In simple terms, the answer to your question is yes.

If you have a property with 22 radiators you really need to invest in a thermostatic control system that is not driven by a single thermostat feeding radiators with TRV’s.

Honeywell Evohome is worth considering (expensive) if you don’t use all the rooms every day or on a very regular basis.

Hive is ok, but it does not independently zone radiators. It is great for a 3 bed house with 2 adults and 2 children - that is the scenario that ( I think) the algorithms are written around.
 
Wow 22 rads, has the system not been split into zones?

On a Combi as well :)

Op remove the trv head you can put your thermostat there then
 
In simple terms, the answer to your question is yes.

If you have a property with 22 radiators you really need to invest in a thermostatic control system that is not driven by a single thermostat feeding radiators with TRV’s.

Honeywell Evohome is worth considering (expensive) if you don’t use all the rooms every day or on a very regular basis.

Hive is ok, but it does not independently zone radiators. It is great for a 3 bed house with 2 adults and 2 children - that is the scenario that ( I think) the algorithms are written around.
Thanks ..yes I'll look into the Honeywell.
It was rather a rushed decision to go for the Worcester thermostat.
Will see how this coming winter pans out then take it from there.
[automerge]1571562583[/automerge]
Wow 22 rads, has the system not been split into zones?
Unfortunately no....the new system followed the design of the old one it replaced.
Huge opportunity missed there as the property was basically gutted as a renovation project.
So would something like the Evohome mentioned on this thread get over the fact the new system wasn't zoned as it should have been ?.
 
Last edited:

Similar plumbing topics

It's not 'amateurish', what you've had...
Replies
3
Views
686
I have, if you never turn the boiler off, and...
Replies
6
Views
2K
Anyway, you can always increase the boiler...
Replies
16
Views
1K
Replies
7
Views
2K
    • Like
From this post, I think you’ve got a good...
2
Replies
47
Views
6K
Back
Top