Danfoss TP7000/RX1 problems

[laundryboy]

Hi - Having some trouble with these two. When the wireless controller has the flame symbol displayed, the boiler does not fire up. Also, when the boiler is running, if the controller has no flame symbol, the boiler does not cut out. Manually moving the temperature up and down switches the boiler on and off, so I am happy with the wiring to the boiler (Worcester combo) - it just seems that there is a communication problem.

One thing that may be contributing to this is the fact that the 'learn' button on the remote does not click or appear to move when pressed - so I am thinking that may be the cause?

Any suggestions welcome - I am 8000 miles away, on the edge of civilisation!

 

[tamz]

Any suggestions welcome - I am 8000 miles away, on the edge of civilisation!

Max range is usually about 30 meters. You might want to move a bit closer :wink:

 

[laundryboy]

Nice one Tamz!

Solved the problem myself - the hole to access the 'learn' button had not been accurately drilled into the casing, and so the button was being permanently held depressed (flat batteries this morning, smelt a rat). Took it apart and enlarged the hole, working a treat - thanks Danfoss, sixty quid I paid for that controller.