Decomissioning an oil boiler. | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Decomissioning an oil boiler. in the Boilers area at Plumbers Forums

Status
Not open for further replies.

cr0ft

Plumbers Arms member
Plumber
Gas Engineer
Messages
3,311
Hi all. Quick Q. Putting in an electric boiler for a customer. The now disused oil boiler is obviously still connected to the oil tank. Should there be a shut-off valve on the feed from the oil tank to the boiler somewhere? Ideally I just want to close the valve off then disconnect the old boiler, collecting any oil that drops out of the old boiler of course.

The disused boiler is in exactly the same place as where the new one is going to go basically!

I don't really do oil and if it's more technical than that I will get someone in but it's like finding hen's teeth getting OFTEC engineers around here and I want to keep the project moving.

Cheers in advance for any replies.
 
should leave oil boiler in situ, so that when the first leccie bill comes in they can turn the oil boiler back on!
 
LOL. Off peak electric is much cheaper than oil!
 
not much copp if its snowing for 2 weeks tho and they want hw and heat 24/7
 
The boiler I am installing is a 330 Litre storage cylinder basically that charges up on an E10 tariff. 3 hours in the afternoon and 7 overnight. This ensures there is plenty of heat in the cylinder to run the heating as required through the day, it covers HW too. They are great boilers and all my customers are well chuffed moving from oil to electric. They are all saving around £500 per year.
 
The downside is the boiler costs the thick end of £3,000.

Do you know how to isolate an oil boiler from the tank though?
 
Should be an isolation valve at the tank, turn it off and mechanically cap it there.
 
Isolate oil at tank and run the boiler till it locks out. Disconnect at the tank or boiler (whichever is lowest), tape a 2 litre bottle over the pipe and then disconnect the other end. Can always put the foot pump on to help blow it out.
 
Thanks. There is what looks like a valve of some sort on the outlet from the tank. I will photo it tomorrow to get your advice. The whole house is being gutted but I don't want an oil leak running into the house when I disconnect it.

Cheers!
 
Status
Not open for further replies.

Similar plumbing topics

External hounsfield heat only. If you really...
Replies
4
Views
968
When replacing an old Certikin 180 oil pool...
Replies
2
Views
584
hi, no current pipework in concrete i believe...
Replies
7
Views
1K
Replies
9
Views
936
Was the oil pressure checked before replacing...
Replies
1
Views
923
Back
Top