Do I need to earth bond this airing cupboard pipe? | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Do I need to earth bond this airing cupboard pipe? in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
F

Foxtrot Oscar

Hi guys

I've recently taken a 22mm cooper pipe down from my cold water cistern to the shower pump in the airing cupboard.

My question is simply - do I need to earth bond the exposed vertical pipe you can see in this picture?

http://i.*********/4Qm7u.jpg

The other (painted) pipes are already bonded as you can see.

Many thanks.
 
might as well do it, just link into the other bonding. on the cold feed to the hot cylinder it looks like the bonding clamp is on painted pipe, goode idea to redo that as well just scrape the paint off under the clamp.
 
Earth bonding and push-fit fittings!
Not a good idea - waste of time!
Is push-fit all over the house?
 
Last edited:
Status
Not open for further replies.

Similar plumbing topics

  • Question
Thanks very much for all the advice John, it's...
Replies
13
Views
997
  • Question
Hi Ric - thanks you so much for taking time to...
Replies
4
Views
1K
  • Question
Thanks for the advice... makes total sense...
Replies
13
Views
2K
That's my next job - lift the nearby lid up...
Replies
4
Views
800
Back
Top