Do you have an Anton Sprint Pro Yet ?

[CorgiDirect]

Do you have an Anton Sprint Pro Yet ?

Here's 4 reasons to buy one from CORGI direct.

1, Best Prices Online
2, Double water stop technology
3, The toughest unit Anton have ever produced
4, Added iOS and android connectivity (previously android only) -

https://www.corgi-direct.com/anton-flue-gas-analysers-18087-0000 …

 

[Harvest Fields]

Good bit of kit. I have a Kane this time around but had an Anton when I was contacting at BG.

 

[Mastermixlee]

Have they sorted out the issues with the burner pressure readings being really sporadic?
Had one of these units and had me call out cadent for suspected governor issues but ended up being the anton unit doh!

In the end apparently it was a known issue and I'm back on sprint v3 at the moment. But very interested in the pro as found as a fga it was alot better than the old sprints. . And usb c charging using the gas leak detector is incredibly handy as can use a battery bank with it.

 

[CorgiDirect]

Have they sorted out the issues with the burner pressure readings being really sporadic?
Had one of these units and had me call out cadent for suspected governor issues but ended up being the anton unit doh!

In the end apparently it was a known issue and I'm back on sprint v3 at the moment. But very interested in the pro as found as a fga it was alot better than the old sprints. . And usb c charging using the gas leak detector is incredibly handy as can use a battery bank with it.

Leave it with me , will reply shortly

 

[CorgiDirect]

Leave it with me , will reply shortly

We asked our contact at Anton, Damian Cairns, for comment and he contacted their General Manager, Steve Couper, as he wasn't aware of any known issues relating to the pressure measurement functionality of any of their instrument ranges. The response from Steve was "I’m not aware of any known issues with pressure on this or any model. Most warranty returns have gone through me throughout the entire life of eVo & most of V too, the pressure function is something we very rarely see an issue with". Damian added "We would be happy to speak with the engineer and understand his/her concerns. If they had a problem it would have been an isolated case rather than a common problem. In my 10 years dealing with Anton I can only think of 1 solitary situation where a customer had a problem with the pressure functions on their analyser which a re-calibration resolved. The pressure and temperature functions give us virtually no problems at all. They're very stable sensing technologies. We are very confident in the performance of the pressure functions on Pro (and indeed V and eVo before it). If you can get their name and number we'll happily call them on Monday to assist with any further questions or concerns. Thanks."

Hope this helps

 

[Mastermixlee]

We asked our contact at Anton, Damian Cairns, for comment and he contacted their General Manager, Steve Couper, as he wasn't aware of any known issues relating to the pressure measurement functionality of any of their instrument ranges. The response from Steve was "I’m not aware of any known issues with pressure on this or any model. Most warranty returns have gone through me throughout the entire life of eVo & most of V too, the pressure function is something we very rarely see an issue with". Damian added "We would be happy to speak with the engineer and understand his/her concerns. If they had a problem it would have been an isolated case rather than a common problem. In my 10 years dealing with Anton I can only think of 1 solitary situation where a customer had a problem with the pressure functions on their analyser which a re-calibration resolved. The pressure and temperature functions give us virtually no problems at all. They're very stable sensing technologies. We are very confident in the performance of the pressure functions on Pro (and indeed V and eVo before it). If you can get their name and number we'll happily call them on Monday to assist with any further questions or concerns. Thanks."

Hope this helps

Hi thanks for the info. Does help.

The calibration date of a new unit I'm guessing is preprogrammed into the device as most are. But my question is does that date start from when it's shipped out or is it when the instrument is first turned on?
Got a friend who's buying all his stuff for working in their own but they are not sure if they would lose months of use due to buying the gear earlier than needed.

 

[CorgiDirect]

Hi thanks for the info. Does help.

The calibration date of a new unit I'm guessing is preprogrammed into the device as most are. But my question is does that date start from when it's shipped out or is it when the instrument is first turned on?
Got a friend who's buying all his stuff for working in their own but they are not sure if they would lose months of use due to buying the gear earlier than needed.

No problem, will reply shortly

 

[Mastermixlee]

No problem, will reply shortly

Great, looking to make my purchase soon too so will be good to know.

 

[CorgiDirect]

Great, looking to make my purchase soon too so will be good to know.

Direct from supplier

All of our instruments (all our Flue Gas Analysers and our new range of pressure meters) are given a 13 month calibration certificate at point of manufacture when they're calibrated. This allows for them to pass through our distribution channels and still provide the end user who has ultimately purchased the instrument with at least 12 months on their initial certificate from time of purchase.