Domestic gas book? | Gas Engineers Forum | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Domestic gas book? in the Gas Engineers Forum area at Plumbers Forums

Status
Not open for further replies.

macka09

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,248
Hi all

as mentioned in another post I'm hoping to start a course for my acs tests. Although I haven't signed up with anyone yet I would like to be able to start learning the theory side of things so can anyone tell me what books I need to buy? I know training providers supply the books but if I don't start the course till September I'd like to get a head start.
 
Get the one you will use at the centre, or better still ask the centre for your book, have you paid a deposit or anything yet? If so I'm sure they will give you a book
Do yourself and the trainer a favour by not asking too many questions ahead of the rest of the group, it just wastes everyone's time
 
Read the installation instructions for a few boilers and bobs your uncle. Instructions are free.
 
[DLMURL]http://www.gb-gas.co.uk/CCount/click.php?id=20[/DLMURL]

a start
 
Last edited by a moderator:
Hi,
Done mine a couple of months ago, some books that are good Corgi Domestic gas essentials and also the Viper gas manual are very good at all aspects.
Br Chris
 
Viper good ref for a starter. "Croppies domestic metrosexual boilers" is another excellent book hundreds of pages of useful info and tips on all boilers of distinction, all the pages other than the cover are glued together with a cutout for an "isar axe" and a cellophane cover with the following words printed on it "if less than 1Mw break glass and smash up appliance"
 
Last edited by a moderator:
i personaly find the viper a bit non technical compared to others. The corgi ones are ok, the niciec one are ok too. Tolleys is quite good.
 
My acs was through logic but I personally found the viper had more depth to it, I have heard that the bpec manual is very comprehensive but a bit awkward to reference
 
My acs was through logic but I personally found the viper had more depth to it, I have heard that the bpec manual is very comprehensive but a bit awkward to reference

The bpec is a good book, I think the format is very straight forward and logical, modules 1-15 for CCN follow the route through legislation, combustion then vents, controls flues etc, the way you would train from start, however there are still far too many typos in it, the recent version has some of them fixed from the last version which had about 20 I think, I had a printed list of what was in the book, module, page paragraph etc then what it should be changed to, when I issued new books we spent half an hour going through changing, which is ok if you have the corrections, I haven't had time or inclination to sit and go through the new version yet, that's on the to do list for doing at the caravan over the summer
 
Just a shout out for the NICEIC On Site Guide for Domestic Natural Gas. I find it thorough and well-aligned with the ACS syllabus.
 
Status
Not open for further replies.

Similar plumbing topics

Quite often the training provider will tell...
Replies
1
Views
2K
Aquarius
A
Apparently there is a management learning...
Replies
5
Views
1K
Hi everyone I currently work in oil and gas...
Replies
0
Views
1K
One DM in five years? Congratulations on...
Replies
2
Views
837
Hi all, hope this is ok to post here but I’m...
Replies
0
Views
2K
Back
Top