Draining gravity back boiler | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Draining gravity back boiler in the Boilers area at Plumbers Forums

Status
Not open for further replies.
Messages
7
Hi I could do with a bit of guidance to empty my system to clean and inhibit it I think I'm on the right track with the below method but would like someone who does this as a profession to double check, I have had to put up with some knocking pipes this winter (1st time since moving in 14 years), I emptied the system a few months back but there must be some dirt left as it came back in a few weeks.

my question mainly which I'm quite confused with is I have three radiators down stairs but they all have drop feed and return pipes and only two of the radiators have drains, is this normal as this won't drain the complete system?

Would it be best to drain the system as much as I can then shut the valves on the last one and remove the radiator (as if it was being replaced) drain the remainder of the water from the two pipes (what type of fitting would I need for this?) and then add a drain onto this radiator as well.

after I have done this there would still be water going down to the pump side would the cleaner/ inhibitor do its job with this water i.e. Would it push the dirt round the system and would it be ok to leave that much diluted cleaner in the system when I drain to put the inhibitor in.

thanks very much in advance.
 
Just fill and drain 2 or 3 times circulating the water between each drain down
 
Status
Not open for further replies.

Similar plumbing topics

Ok, thanks, so if it can not be accessed from...
Replies
5
Views
951
L
I can see the small leak in back boiler, have...
Replies
0
Views
564
LyndaB
L
Very informative...........thx🙄
Replies
3
Views
572
You’re 200 miles away - he is there. You’re...
Replies
3
Views
586
Back
Top