Dripping fitting after re pressuring ( greenstar 28i junior) | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Dripping fitting after re pressuring ( greenstar 28i junior) in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
A

Andy-jh

Can anyone help?

I've had to re pressurise my combi boiler (green star 28i junior) after the pressure had dropped, I followed the manual and inserted the filling key into the filling link turned to padlock icon then turned the white knob to fill the system. I then reversed this when the pressure was adequate and closed the filling key to the closed position, I then removed the filling key but there is now a gradual drip of water slowly dripping out of where i placed the key...,can anyone help?
 
Status
Not open for further replies.

Similar plumbing topics

Ok thanks Shaun đź‘Ś
Replies
2
Views
706
If your fitter repressurised the E.vessel then...
Replies
9
Views
2K
If there’s is the chance that many things will...
Replies
10
Views
2K
Thanks very much for your help.
Replies
4
Views
1K
Hello All- (Usual caveats apply: I am the...
Replies
0
Views
207
Back
Top