Dripping Franke Triflow tap | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

  • Thread starter eustache
  • Start date
  • Replies 2
  • Views 9K

Discuss Dripping Franke Triflow tap in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
E

eustache

Hi,
I have a Franke Triflow (non-ceramic) tap which drips from the cold and the hot taps, but not the filtered tap. I don't know if it is possible to replace the internals, or replace the unit on a like for like basis. I would be reluctant to replace with a different tap as I have loads of spare cartridges to use up.


Any help would be appreciated.
Best wishes,



Peter
 
When you say drips from the cold & hot taps - do you mean from the spindle inside the handles?
Are you sure it is non ceramic? 1/4 turn ceramic Franke works can leak at the spindle caused by worn tiny O rings in the spindle part.
Central Services do parts for them & can post you any parts if you give them a ring & they have all the data online.
 
The leak is from the hole the water comes out of, rather than the spindles. The taps are definitely not ceramic disc (very 'soft' to turn off, and much more than 1/4 turn).
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Will do! Appreciate the help Thanks 👍
Replies
5
Views
729
  • Question
Take it back to the shop.
Replies
3
Views
700
  • Question
Hi, there is no grub screw. I have attached...
Replies
6
Views
365
B
  • Question
Need to remove the spout on a Franke Olympus...
Replies
0
Views
862
Bob Hope
B
  • Question
Hi. I have a kitchen mixer tap unit with older...
Replies
0
Views
681
Back
Top