Dual Flush | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Dual Flush in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
C

claire21

Hi Guys,

Hoping someone could give me a bit of advice, we have a dual flush button on our toilet thats a circle shape and its like a half moon shape on the larger part of it and the smaller part of it always falls out and my son accidently flushed it down the toilet! bit of a nightmare, is it possible to buy replacement parts for these or would the whole flush system need replaced?

Thanks for any advice
Claire
 
Hi Guys,

Hoping someone could give me a bit of advice, we have a dual flush button on our toilet thats a circle shape and its like a half moon shape on the larger part of it and the smaller part of it always falls out and my son accidently flushed it down the toilet! bit of a nightmare, is it possible to buy replacement parts for these or would the whole flush system need replaced?

Thanks for any advice
Claire
you should be able to get a new button assembly from where ever the wc came from
 
Status
Not open for further replies.

Similar plumbing topics

N
Dual Flush is a water-saving design for a...
Replies
3
Views
2K
When you say 'cleaned the bottom of the tank'...
Replies
4
Views
1K
Thank you for the replies. Turns out the...
Replies
4
Views
4K
Email these guys...
Replies
1
Views
1K
  • Question
Take it back out and put it back in the same...
Replies
21
Views
8K
Back
Top