Duravit space saving waste and vanity unit | Bathroom Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Duravit space saving waste and vanity unit in the Bathroom Advice area at Plumbers Forums

Messages
3
Hey everyone,

I have a Duravit vanity unit and was recommended to buy the Duravit space saving waste: 005076

1699460127605.png


But im unsure how this connects to the waste pipe in the wall. The plumber has fitted a standard waste, but he had to cut a hole at the back of the vanity. There is another to install and im wondering if there is a way to use the correct space saving waste.

Has anyone ever installed these that could advise please?

Here is a picture of the vanity unit and current waste...
 

Attachments

  • IMG_5985.jpeg
    IMG_5985.jpeg
    48.6 KB · Views: 41
Yes fitted loads they are a bit of a pain , you need one on these - the silver bit is compression fitting with two sizes of rubber inserts. They are mcalpine euro / solvent .
Tbh if you have the cupboard I would go with what your plumber’s done - you only need that silly geberit/Duravit waste kit with some of the drawer units.
 

Attachments

  • IMG_5663.jpeg
    IMG_5663.jpeg
    190.2 KB · Views: 35
Yes fitted loads they are a bit of a pain , you need one on these - the silver bit is compression fitting with two sizes of rubber inserts. They are mcalpine euro / solvent .
Tbh if you have the cupboard I would go with what your plumber’s done - you only need that silly geberit/Duravit waste kit with some of the drawer units.
Thanks Ben, do you have a link for that picture you sent please?
Will this fitting connect the waste pipe in the wall to the Duravit kit (the cigarette box shaped thingy?)
thank you!
 
Thanks Ben, do you have a link for that picture you sent please?
Will this fitting connect the waste pipe in the wall to the Duravit kit (the cigarette box shaped thingy?)
thank you!

 

Similar plumbing topics

  • Question
Update : bought a McAlpine ST90CP10-V vertical...
Replies
5
Views
2K
  • Question
Only way to find out as above mcalpine make...
Replies
2
Views
827
R
  • Question
Have you tried sealing around the 3 edges with...
Replies
1
Views
1K
  • Question
Memo to myself:- Read all posts before posting! 😁
Replies
10
Views
3K
Back
Top