effective flushing? | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Billy Bob Bob
  • Start date
  • Replies 1
  • Views 1K

Discuss effective flushing? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
B

Billy Bob Bob

how effective is power flushing?the way i have allways done it is to add x400 run hard for min 30 hours,remove all rads and flush tillclean,also pipe work useing the filling loop,then re-fit and add x100 i have allways found this effective and i check the strenth of the x100 every 2 years but its hard work should i get a power flusher?and does it work as well?
 
Powerflushing machines are brill. Allow you to do the same job but from one point in the house. Less hard work lugging rads about. Less risk of mess. As long as its done properly its great.
 
Status
Not open for further replies.

Similar plumbing topics

Its easy to check for a leak, just tie up the...
Replies
7
Views
1K
Replies
0
Views
504
Sorry missed your reply! I try to answer your...
Replies
2
Views
2K
It is set to that, max output, CC3 at 6.5M...
Replies
19
Views
2K
  • Question
Hi John Yes I have evacuated tubes. They are...
Replies
2
Views
1K
Back
Top