Electric boilers | Boilers | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Electric boilers

Post thread

Discuss Electric boilers in the Boilers area at Plumbers Forums

Status
Not open for further replies.
C

Ch4 plumbing

As above has anyone got any experience? I've fitted the Heatrae Sadia Amptech before but I'm looking at pricing some flats and the spec is Heatrae Sadia Electromax for heating/hot water?

Any good?

Problems?

Horror stories?

cheers Chris
 
very big heavy units, work ok but are a very tight fit in most cupboards, if i had a choice id fit amptech and a seperate direct unvented cylinder.

builder i did them for got them for around a grand which was very cheap.
 
Last edited:
fitted one of these, never had a problem so far
[DLMURL="http://www.elnur.co.uk/Elnur-UK-Products/electric-boilers/electric-combi-boilers.html"]Elnur UK - Electric combination boilers[/DLMURL]
 
Last edited by a moderator:
AWheating said:
very big heavy units, work ok but are a very tight fit in most cupboards, if i had a choice id fit amptech and a seperate direct unvented cylinder.

builder i did them for got them for around a grand which was very cheap.
Click to expand...

Agree with that and tried to convince them otherwise but they like the idea of one complete unit. Have you fitted many?
 
Ch4 plumbing said:
Agree with that and tried to convince them otherwise but they like the idea of one complete unit. Have you fitted many?
Click to expand...

Fitted 8 a few years ago, I've since fitted the amptec with cylindes and it's a lot better
 
Was just about to start a post with same title!

Just out of interest what qualifications should we hold to install and carry out maintainence on electric boilers? I've got a call out on one today but he said the tundish is running on the unvented cylinder. Just didn't know regarding the boiler side?
 
Fallon1982 said:
Was just about to start a post with same title!

Just out of interest what qualifications should we hold to install and carry out maintainence on electric boilers? I've got a call out on one today but he said the tundish is running on the unvented cylinder. Just didn't know regarding the boiler side?
Click to expand...

It wasn't even an electric boiler after all that... Combination valve on an unvented cylinder. Typical no-it-all customers!
 
Status
Not open for further replies.

Similar plumbing topics

E
  • Question
Loss of Hot Water Pressure to Shower
I don't see your comments?
Replies
8
Views
731
John.g
J
J
Hyco Electric Boiler - switch off for occasional use?
Do I switch off Electric Hot Heater Cylinder...
Replies
0
Views
670
johnlagan
J
C
  • Question
Hot water is ok but only runs when two or more taps are on
Thanks for the suggestions, I've attached a...
Replies
3
Views
1K
chhdgn
C
S
I don’t know what to tell my landlord about the toilet?
He went for the putty because he doesn't know...
Replies
6
Views
1K
Ric2013
R
D
Circulation pump with electrical speed switching for wood boiler stove
Are you controlling the stove flow temperature...
Replies
6
Views
1K
John.g
J
Back
Top