Electrician Antique motor wiring | Electrical Advice | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Electrician Antique motor wiring

Post thread
Post reply

Discuss Electrician Antique motor wiring in the Electrical Advice area at Plumbers Forums

Antique motor wiring

Hey all

I have an old motor that I would like to repurpose. Its an old Lister/Hoover

I have searched the net but cannot find any specifics on its wiring. It says 200/220V but I am not sure which terminals to connect to and if I need to check anything else

Motor Plate.jpg


There are 4 terminals at the rear and what appears to be an oil port for the bearing



Terminals 1.jpg


the resistance readings across the terminals is as follows

Motor Resistances.jpg


The capacitor has been laid against some cardboard inside the casing for quite some time and some of the markings are illegible

Capacitor.jpg


Any help you could give would be great

TIA

Antique motor wiring for more information

You may reply to this message here.
 
Click to expand...
Back
Top