Flashing LED advice
Hi All
Was hoping to pick your brains regarding a job that had me scratching my head today.
6 x 6ft LED Ansell in a small garage, controlled via a PIR at either end. Been in for approximately 4 years no issue. They now (when triggered) all begin to flash (randomly along the fitting, not in one particular spot) settle after 60 seconds leaving 1 or 2 of the fittings randomly flashing. I don't believe they have all gone rogue at the same time without some sort of external cause. Anybody able to offer any advice?
I have disconnected different fittings, and still have the same issue on those remaining.
Voltage is fine, SPD hasn't blown. Can't see it being an issue with in-rush current if they have worked for so long either.
Any advice is appreciated!
Flashing LED advice for more information
You may reply to this message here.
Hi All
Was hoping to pick your brains regarding a job that had me scratching my head today.
6 x 6ft LED Ansell in a small garage, controlled via a PIR at either end. Been in for approximately 4 years no issue. They now (when triggered) all begin to flash (randomly along the fitting, not in one particular spot) settle after 60 seconds leaving 1 or 2 of the fittings randomly flashing. I don't believe they have all gone rogue at the same time without some sort of external cause. Anybody able to offer any advice?
I have disconnected different fittings, and still have the same issue on those remaining.
Voltage is fine, SPD hasn't blown. Can't see it being an issue with in-rush current if they have worked for so long either.
Any advice is appreciated!
Flashing LED advice for more information
You may reply to this message here.