expansion vesse lworcester bosch 28i junior

[spooney54]

hi,
Is it necessary to disconnect the old expansion vessel before fitting an external e/v to a28junior
boiler. suspect I've got one that's leaking slightly.

 

[Eric withy]

i think you just answer the question ye self spooney54

 

[Eric withy]

i would cap the old if i could not replace the vessel and install external

 

[Dotty]

Moved off open forum.

 

[GrahamM]

If can get to it ok would normally cap as saves any further issues with old vessel. But i have left some in past as it is.

 

[gassafe]

Is it a greenstar model? You would need one of those caps which Worcester supply with the new boilers that we have to remove prior to connection the new vessel!!

 

[ShaunCorbs]

Is it a greenstar model? You would need one of those caps which Worcester supply with the new boilers that we have to remove prior to connection the new vessel!!

or if your in a pinch and dont have one seen people cap the flex (if its that type) (vr1) or ifs it the newer one you need the cap sorry to say

 

[spooney54]

Thanks all for replies. will cap off.