L
Lovetherust
Hi chap/chapesses, i have a quiry regarding my boiler, i have an 9 year old ideal h24 that suddenly wont heat up my tap water very well being tepid at best but heating works fine, iv looked at the d/valve and the pin pushes in and returns ok, when i turn the hot water on after a second or so the pressure gauge will go mad with the needle going from 1bar to 1.5 down to .5 and alot of clicking coming from the boiler. Now, i am not a plumber and i wont be diy-ing it but if anybody can point in a better place to start so i dont get fobbed off and spend money i dont need to spend, if any more info is needed il do my best to answer thanks in advance