External expansion vessel

[buckley plumb]

Bought an expansion vessel from toolstation with mounting bracket. What a pain didn't come with locking nut to hold to bracket. I used 3/4 backnut but them female iron would not bottom out as nut was to thick.

 

[buckley plumb]

Expansion Vessel - Toolstation

 

[lame plumber]

what you on about?

 

[buckley plumb]

what you on about?

Too much rum lol. Bought vessel and bracket it was not s watts they supplied. It come without mounting nut anyone else had this. Only bought it as it was cheaper than the ones from merchants. Learnt my lesson now

 

[harrygashull]

They should come with a screw or a large jubilee clip

 

[Gasmk1]

If have had this its a nice bracket that you put the thread through a hole in bracket and a lock nut holds it in place only problem is the threaded section is then too short for fittings

 

[buckley plumb]

If have had this its a nice bracket that you put the thread through a hole in bracket and a lock nut holds it in place only problem is the threaded section is then too short for fittings

Exactly mate. On some backnut bottoms out of thread before clamping.