Facebook challenge :D

[ShaunCorbs]

Some people didn't think pressfit was any good due to there problems with push fit eg the o rings so I did a little test and thought why not post the results here as well

Hope the pics are in order

 

[quality]

We use them in refrigeration at 30 bar plus. Obviously not plumbing fittings. I am not a press fit walker myself but it is a big part of the future

 

[ShaunCorbs]

We use them in refrigeration at 30 bar plus. Obviously not plumbing fittings. I am not a press fit walker myself but it is a big part of the future

i just dont see why it gets so much hate

 

[quality]

It may be mature folk that don't like change. I am not a great fan but I will use it where its needed. No hot work permit, no fire watch, no grief

 

[ShaunCorbs]

It may be mature folk that don't like change. I am not a great fan but I will use it where its needed. No hot work permit, no fire watch, no grief

whats the reasons your not a fan?? just for reference

 

[Scott_D]

It held with no o ring?

 

[ShaunCorbs]

It held with no o ring?

yep 14 bar didnt want to go more due to the speed fit cap end and no hardhat

 

[quality]

whats the reasons your not a fan?? just for reference

Just because its easier for somebody else to make a mess off the job that we regularly have to put right

 

[ShaunCorbs]

Just because its easier for somebody else to make a mess off the job that we regularly have to put right

true but that isnt only contained to press

 

[quality]

true but that isnt only contained to press

I agree entirely.

 

[ShaunCorbs]

what not to do with foam lol

 

[Harvest Fields]

Can you send me the link for that video please.I have some mates that are that stupid

 

[ShaunCorbs]

Can you send me the link for that video please.I have some mates that are that stupid

https://www.************/sandy.rook.9/videos/10215080561421729/

without the front and back dots/line things

 

[Harvest Fields]

It just comes up with a google page. I cannot remove the end things

 

[ShaunCorbs]

It just comes up with a google page. I cannot remove the end things

Removed the end bits and copy and paste the link have had to set it for google as the forum auto sorts links eg shows the vid not the link

 

[townfanjon]

Jezzus , thats a tame vid compared to some I have , one sent last night showed a bloke cutting off this n@bheads fingers with an axe .

As for pressfit, its superb , I am just too tight to move over to it