- Messages
- 5,168
Hi guys, i would really like some advice. Do you guys use PTFE tape to make your brass connections to a cylinder? Or is there a jointing compound that can be used?
I filled up a horizontal cylinder today just before finishing off for the day and then get a weep on the cold feed. So had to drain down and leave until am back there on wednesday.
I never get this problem with hawk white while working on iron barrel.
Any advice would be great. Thanks
Lee
I filled up a horizontal cylinder today just before finishing off for the day and then get a weep on the cold feed. So had to drain down and leave until am back there on wednesday.
I never get this problem with hawk white while working on iron barrel.
Any advice would be great. Thanks
Lee