Ferroli help needed in Malvern, Worcs | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ferroli help needed in Malvern, Worcs in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
D

desperateinmalv

Hi, I was recommended to post something here re. our broken boiler - original post as follows. Please reply if you can help!

Hi, we have a Ferroli F30 that hasn't been working for either CH or HW for a while.


The low water pressure light is flashing despite the pressure gauge reading 1 bar. Having spoken to Ferroli I 'overrode' the low water pressure sensor by just joining the leads to it with a piece of wire and it worked fine, so I changed the water pressure sensor itself but that hasn't solved the issue. If anyone has any suggestions as to what else I can do I'd be very appreciative! Could changing the pressure gauge itself fix it? It seems to work fine as it rises/falls as I fill/bleed the system. Someone has mentioned that the flow and return valves could be jammed but I'm not sure what this means?


Many thanks in advance


Robert
 
thank you for your enquiry Robert if anyone can sort out robs boiler issues please contact him via pm
 
Status
Not open for further replies.

Similar plumbing topics

Unfortunately most household insurance...
Replies
16
Views
2K
  • Locked
Time to get a gas safe engy in
Replies
1
Views
2K
If it's creeping back upto 3 bar with nothing...
Replies
7
Views
5K
S
Thanks everyone for the advice so far. I got...
Replies
6
Views
1K
Sam Wain
S
Hi It seems like i have exatly same problem -...
Replies
2
Views
1K
Back
Top