Ferroli Modena HW probs | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Ferroli Modena HW probs in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
7
Hi,

My Modena 80e has started playing up.

Shower is Grohe 2000 mixer bar and the water gets hot, then after about 3 minutes goes for much cooler and then back to hot again and repeats. Burner is on all the time and I replaced both thermistors about 8 months ago due to same problem and the shower mixer is only 6 months old as well.

Could the thermistors have gone already (not sure if they were genuine Ferroli sensors or pattern parts) or is it something else?
CH is totally fine.

Thanks
 
kitchen hot tap does the same?

and are you gas safe registered?
 
Kitchen and bathroom sinks 'seem' ok.
Not gas safe, just oik. If anything more than sensors, I'll get someone in.
 
Not boiler if there ok

And FYI you can't remove the boilers case without being gas safe even if your repairing the water side

Either cartridge gone or hot and cold piped up wrong to the shower
 
Kitchen and bathroom sinks 'seem' ok.
Not gas safe, just oik. If anything more than sensors, I'll get someone in.

Seems ok! Seems ok! But how often do you run the sink and basin hot tap for longer then 3 minutes? Leave each hot tap running on full 1 at a time. I.e kitchen first and stand in front of the boiler for 5/10 minutes to see if the boiler cuts out and comes back on again? Repeat this for the basin and the bath. Let me know if it does.
 
All other taps are fine and boiler runs continuously, so looks like shower mixer issue. Can the cartridge be cleaned?
 
Does this look like your shower?

EFC8B8AD-031B-4B3D-AB39-7CACBF7CB625.png
 
Status
Not open for further replies.

Similar plumbing topics

A
  • Locked
You have a large choice as far as boilers are...
Replies
2
Views
5K
A
  • Locked
Hello, this is my first post on the site so I...
Replies
0
Views
867
AussieAndrew
A
A
  • Locked
Thanks for the advice... hopefully the BG...
Replies
3
Views
3K
AndyPUK
A
F
  • Locked
Thanks Tom
Replies
3
Views
2K
Fountain
F
D
  • Locked
Thread closed. Please read the forum rules and...
Replies
3
Views
4K
Dotty
D
Back
Top