Filling Station | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Filling Station in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

jaydebruyne

Plumbers Arms member
Plumber
Gas Engineer
Messages
2,718
Took me a while to figure out this was actually the filling loop to the system today - constantly open inlet with a 1.5 bar pressure reducing valve and expansion vessel - never seen it done like this before :/

f7a06afdbec37a67e6c1c7d4bb2e2d49.jpg
 
Hahaha that's one way for an auto filling loop guess they have a leak on the system
 
Was there to replace a grundfos pump and a burner gasket - started draining the system while I changed the gasket and it was still strong.. That's when I found this beauty
 
Constantly refilling with oxygenated water. I'd love to see the state of the system water. Have you got your powerflush machine yet Jay? That one will need it sooner rather than later I reckon...
 
Constantly refilling with oxygenated water. I'd love to see the state of the system water. Have you got your powerflush machine yet Jay? That one will need it sooner rather than later I reckon...

Have indeed! I thought I was going mad when I couldn't find the filling loop haha
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Found it, pressure adjusted. You are a star...
Replies
2
Views
635
Pin hole leak on suction side of pump.
Replies
1
Views
467
The two red valves with brass caps on eg the...
Replies
2
Views
963
thank you, good tip, I will try
Replies
3
Views
1K
Back
Top