Fitting back to wall toilet

[andyfto]

Hi,
I am having trouble figuring something out, I need to cut a piece out in the panel that pops on and off to allow for the flush and waste pipes (panel is the full height of the unit, not a 2 piece one) but when the panel is fitted and toilet positioned i cannot see how i would reach down to connect the waste and flush pipes.
If i try to connect the waste and flush pipe when the panel is fitted and toilet is away from the panel so i can reach behind to connect the pipe then the flush pipe wont reach.
If i fit the toilet and connect the pipes without the panel fitted then the panel wont fit on afterwards.

Please help!
Thankyou
Andy

 

[stevetheplumber]

you either set it all up rigid and slide the pan back onto it or you use flexi pan con and flush pipe