- Messages
- 20
After reading various forums on the installation of an Essex Flange, and getting opinions from brilliant and easy to install, to don't touch one with a barge pole, I found this site and would like to know if I fit one, which is recommended with the new shower pump I need to install, should you use any sort of sealant on the rubber washers during fitting. And how do you hold it when doing up the olive nut when fitting the 22mm tube?
I intend to clean the HWC first with Fernox DS3 to make sure there is no scale of the wall to ensure a better seal.
It's quite an extensive job as I have to amend a fair bit of the pipework but this is the only thing that give me any real concern and I would like to be sure that what I do is best practice
Any info on this greatly received.
I intend to clean the HWC first with Fernox DS3 to make sure there is no scale of the wall to ensure a better seal.
It's quite an extensive job as I have to amend a fair bit of the pipework but this is the only thing that give me any real concern and I would like to be sure that what I do is best practice
Any info on this greatly received.