Flex icon running constantly | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Flex icon running constantly in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Millsy 82

Plumbers Arms member
Plumber
Gas Engineer
Messages
4,350
Been at a job for a few days doing a couple of bathrooms and the bloke said his boiler stays on constantly. I checked the 2 ports all ok, on the switch live I have got 11v going to it. The boiler is in warranty so told him to get Glowworm out but just wondering.
 
Is boiler running with the zone valves closed, because if open then check controls, i take it there external? timer / stat, Test all controls to see where power is or where it isnt, and if new have the wiring checked to make sure its wired correctly,
 
Sorry milsy forgot to say did you switch it off, (mains) to check if it comes straight back on when switching power back on? to see if any movement at zoner and if boiler comes back on, good luck,
 
I had a quick check and no voltage going where it shouldn't in the airing cupboard so I just thought it could be a Pcb fault. As I wasn't getting paid for looking I didn't go to much into it.
 
Status
Not open for further replies.

Similar plumbing topics

You could try a reset if that doesn’t work it...
Replies
5
Views
825
I feel for you, it's a bad position to be in...
Replies
18
Views
3K
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
952
C
In a word, no. Needs a gas safe bod.
Replies
1
Views
601
..Thanks, i am wondering if we can keep the...
Replies
7
Views
2K
Back
Top