I have a Smith's SS5 Plinth radiator. It does not work and the label suggests that it was installed around 1998. I have obtained a new one and was intending to change the unit and flexi hoses. The new model is supplied with two new hoses but they have a different fitting.
The old hoses appear to have push fit connections at both ends and also a valve. They are 15mm and I think 3/4 width and around 750mm in length. However, I cannot find the same ones anywhere.
Attached are two photos of both ends - one end at the copper pipe side and the other on the SS5 radiator. Due to the limited space under the kitchen cabinet it is not possible to put a spanner in to fit the new compression fitting connections.
Does anyone know where I can get hold of new hoses similar to the old ones? Thanks.
The old hoses appear to have push fit connections at both ends and also a valve. They are 15mm and I think 3/4 width and around 750mm in length. However, I cannot find the same ones anywhere.
Attached are two photos of both ends - one end at the copper pipe side and the other on the SS5 radiator. Due to the limited space under the kitchen cabinet it is not possible to put a spanner in to fit the new compression fitting connections.
Does anyone know where I can get hold of new hoses similar to the old ones? Thanks.
