Floplast MDPE fittings

[Riley]

Hi all

have been asked by a builder to fit a new mains.

He he is supplying the pipe n fittings but is using floplast. I normally only use JG so am after a little advice.

Are floplast fittings demountable?? Looked everywhere but can't find a straight answer

http://m.NoLinkingToThis/p/floplast-mdpe-coupler-25-x-25mm/17684?filtered=true

cheers all

matt

 

[Irish]

How do you mean de mountable?

 

[Riley]

Well the JG ones can be completely disassembled by just unscrewing the socket then the pipe can be removed and the fitting re-assembled. Sorry if I wasn't clear. That's how I've always understood demountable :smile:

 

[Irish]

If you're on about the white fittings 22 & 15mm no they can't. if it's the ones in the link blue mdpe , then yeah they can

 

[Riley]

Cheers Irish I thought that they would but just wanted to save looking a knob on site if I don't get the pipe in far enough or something. Just so I can start again. Thanks again

 

[Irish]

Know what you're saying , that's why I use polyplumb you can take it apart and have a look if you're not sure!

 

[Riley]

Always nice to be sure. Particularly at mains pressure

 

[Ermintrude]

Flow plast on mdpe is horrid cheap and chatty. Philmac

 

[Riley]

Fortunately it is just a temp solution whilst other work is carried out, I'll upgrade to something better

 

[Killy Bing]

I tend to use talbot :devil2:

 

[Ermintrude]

Peugeot Talbot now them was cars!

 

[Nostrum]

My mum had a brown talbot horizon back in the day, it was like a lego poo on wheels.